 |
 |
 |
|
|
|
[Sponsors] | ||||
June 30, 2011, 09:43
|
buoyantSimpleFoam with inflow and ouflow.
|
#1 |
|
Member
Marco Bernardes
Join Date: May 2009
Posts: 57
Rep Power: 16  |
Hi,
I'm wondering how can I use buoyantSimpleFoam to simulate a simple flow in a cavitiy. I'm not sure how can I setup the inlet and outlet boundary conditions. Any help is welcomed. Thanks, Marco. |
|
|
|
|
|
June 30, 2011, 10:13
|
|
#2 |
|
New Member
Oli
Join Date: Apr 2009
Posts: 27
Rep Power: 17 |
Which Foam-Version are you using?
|
|
|
|
|
|
|
June 30, 2011, 10:37
|
buoyantSimpleFoam with inflow and ouflow.
|
#3 |
|
Member
Marco Bernardes
Join Date: May 2009
Posts: 57
Rep Power: 16 |
Thanks for the reply. I'm using the version 2.0.
Marco. |
|
|
|
|
|
|
June 30, 2011, 11:42
|
|
#4 |
|
New Member
Oli
Join Date: Apr 2009
Posts: 27
Rep Power: 17 |
Take a look at the attachment
|
|
|
|
|
|
|
June 30, 2011, 11:44
|
|
#5 |
|
New Member
Oli
Join Date: Apr 2009
Posts: 27
Rep Power: 17 |
damn - the upload is not working
|
|
|
|
|
|
|
June 30, 2011, 11:46
|
|
#6 |
|
New Member
Oli
Join Date: Apr 2009
Posts: 27
Rep Power: 17 |
ok one more try,
you have to do the blockMesh again in this case |
|
|
|
|
|
|
June 30, 2011, 12:50
|
|
#7 |
|
New Member
Join Date: Mar 2009
Posts: 29
Rep Power: 17 |
Hi oli,
Thanks for the set up. Do you think it can work for higher speeds, 30 m/s for example ? I tried so but faced problems to reach convergence. Regards, Fabien |
|
|
|
|
|
|
July 1, 2011, 03:28
|
|
#8 |
|
New Member
Oli
Join Date: Apr 2009
Posts: 27
Rep Power: 17 |
Hi Fabien,
please try these fvSolutions and fvSchemes |
|
|
|
|
|
 |
|
|
Linear Mode
