|
[Sponsors] |
![]() |
![]() |
#1 |
Member
Paulo Bufacchi
Join Date: Jun 2010
Posts: 50
Rep Power: 15 ![]() |
Hello Foamers.
I'm using OF 2.1.x. I noticed a very strange behavior in the total heat release rate (HRR) when running solver fireFoam and the case oppositeBurningPanels (with minor modifications to run faster), as shown below: number of layers ................HRR (J/s) of extruded panel ...............at t=5s ---------------------------------------------- 10 ....................................-13214 5 (case default) ...................-6641 3 .......................................-1173 2 ..........................................-29 1 .............................................0 If the cases are exactly the same, except for the number of layers of the extruded panel, shouldn't I expect the same HRR? Is there a bug or am I missing something? The panel depth is 0.01m in all cases. Thanks, Paulo |
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 25, 2009 23:27 |
Serious bug in LES interface | fs82 | OpenFOAM Bugs | 21 | November 16, 2009 08:15 |
Reynolds Stress model in CFX vs Fluent | Tim | CFX | 1 | October 7, 2009 06:19 |
help for different between les model (subgrid-scale model) | liuyuxuan | FLUENT | 1 | October 2, 2009 15:25 |
Grid resolution for full-scale and down scaled model | gravis | Main CFD Forum | 0 | October 2, 2009 10:27 |