CFD Online Logo CFD Online URL
Home > Forums > Phoenics

output every step result

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 1, 2004, 22:27
Default output every step result
Posts: n/a
my question is how to set in phoenics ,which can output results to solution files at every time step
  Reply With Quote

Old   September 2, 2004, 02:22
Default Re: output every step result
Posts: n/a

Add the following settings in your q1:

csg1 = S (to dump the output files as S1, S2, etc.)

idispa = 1 (the frequency of dumping, 1 sweep in your case)

idispb = 1 (the first sweep for dumping)

idispc = lsweep-idispa (the last sweep for dumping)

You can then load these files in photon and autoplot exactly as you do with the 'phi' file.

  Reply With Quote

Old   September 8, 2004, 21:35
Default Re: output every step result
Posts: n/a
You may do what you want via VREditor (in case your PHOENICS version is 3.4 or higher).

Go to menu/output/field dumping push "page down"; in the line before the last you can choose how often you want to dump the results.

I can send you more information case you need.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
running gambit journal step by step giogio FLUENT 1 March 10, 2008 15:03
can "output control " output Nu in expression? prayskyer CFX 3 July 7, 2006 19:37
Calculating coefficient from factional step result zonexo Main CFD Forum 1 December 2, 2005 09:49
define moving mesh for engine step by step homan FLUENT 0 October 26, 2005 03:27
How to output variables every time step? Dazhi Guo FLUENT 4 January 16, 2001 12:17

All times are GMT -4. The time now is 11:04.