imprting CAD geometry

July 7, 2006, 11:36

Does anyone have a summary on how to (if possible) import CAD geometry into Phoenics. Thanks in advance

July 9, 2006, 13:00

The CAD import procedure is explained in the PHOENICS VR Reference Manual CHAM TR 326, a copy of which can accessed on-line in html or word format at the following url:

http://www.cham.co.uk/phoenics/d_pol...r000/tr000.htm

The CAD file format should be STL, ASCII or binary in recent releases, but only ASCII in earlier releases of PHOENICS.

July 7, 2006, 11:36	imprting CAD geometry	#1
George Guest Posts: n/a	Does anyone have a summary on how to (if possible) import CAD geometry into Phoenics. Thanks in advance

July 9, 2006, 13:00	Re: imprting CAD geometry	#2
Michael Guest Posts: n/a	The CAD import procedure is explained in the PHOENICS VR Reference Manual CHAM TR 326, a copy of which can accessed on-line in html or word format at the following url: http://www.cham.co.uk/phoenics/d_pol...r000/tr000.htm The CAD file format should be STL, ASCII or binary in recent releases, but only ASCII in earlier releases of PHOENICS.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No geometry	ivanyao	OpenFOAM Paraview & paraFoam	3	December 20, 2007 22:58
Help with Geometry.	Naveed.	FLUENT	0	April 13, 2006 05:19
What's the point of imprting an stl mesh?	philip	FLUENT	8	July 6, 2005 16:51
Imprting HYPERMESH Mesh file in Gambit	Atul T. Shinde	FLUENT	1	December 31, 2002 11:39
3D-geometry	shiva ram	FLUENT	0	January 17, 2002 17:00