Home > Forums > Software User Forums > Siemens > STAR-CCM+

residual above 1

Updated Threads

Reply

Search this Thread

August 31, 2013, 10:26	residual above 1	#1
akhshik New Member Join Date: Jul 2013 Posts: 6 Rep Power: 12	Dear all; If the residual chart was above 1 (residual amount=100 in 10000 iteration), What conclusion can be made? Dose the model has a problem?

September 2, 2013, 03:09		#2
Roman Member Roman Join Date: Mar 2011 Posts: 46 Rep Power: 15	Lets keep this discussion in a single thread: http://www.cfd-online.com/Forums/sta...-residual.html

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High Courant Number @ icoFoam	Artex85	OpenFOAM Running, Solving & CFD	11	February 16, 2017 13:40
Unstabil Simulation with chtMultiRegionFoam	mbay101	OpenFOAM Running, Solving & CFD	13	December 28, 2013 13:12
pimpleFoam: turbulence->correct(); is not executed when using residualControl	hfs	OpenFOAM Running, Solving & CFD	3	October 29, 2013 08:35
calculation stops after few time steps	sivakumar	OpenFOAM Running, Solving & CFD	7	March 17, 2013 06:37
Orifice Plate with a fully developed flow - Problems with convergence	jonmec	OpenFOAM Running, Solving & CFD	3	July 28, 2011 05:24

All times are GMT -4. The time now is 20:01.