|
[Sponsors] |
March 13, 2011, 16:52 |
Motorcycle CFD
|
#1 |
New Member
Alex Champion
Join Date: Mar 2011
Posts: 4
Rep Power: 15 |
Hi, I am a student currently doing a thesis on motorcycle aerodynamics. I am very new to any CFD software and have not studied much aerodynamics. I have been teaching myself Star-CCM+ from a meshing tutorial which I was given.
Tomorrow I am going to put a scale motorcycle into a small wind tunnel and take a drag reading through a fixture that screws into a load cell in the wind tunnel floor. My star-ccm+ is using identical: model size and velocitys. This means that the rod which connects between my bike and load cell goes through the floor of the region. (which was set as a symetry plane) I made the scale model which I imported as an X_T file. I then tried to fix the model representations - import [right] - repair surface (I then deselect the two bottom check faces) Problem is - it refuses to surface mesh, the error is as follows: Worst quality is 5.523e-005 initial number of faces: 66732 starting: Apply Global Limits Error during surface remeshing, deleting resulting mesh Parasolid function PK_CURVE_eval_curvature failed. Error token = PK_ERROR_bad_parameter Error code = 120 Severity = mild Command: GenerateSurfaceMesh CompletedCommand: GenerateSurfaceMesh In: [Machine::main] Recoverability: Non-recoverable ServerStack: [SymInit: Symbol-SearchPath: '.', symOptions: 530, UserName: '07034428' , OS-Version: 6.1.7600 () 0x100-0x1 , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 000000000052DE9D) , 000000000052DE9D (StarPlatform): (filename not available): SingletonCleaner::SingletonCleaner , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000000545919) , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00000000003BFC2D) , 00000000003BFC2D (StarNeo): (filename not available): NonRecoverableError::NonRecoverableError , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 000000000038155B) , 000000000038155B (StarNeo): (filename not available): Controller::executeCommand , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000073466BF0) , 0000000073466BF0 (MSVCR90): (filename not available): tanhf , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000073433821) , 0000000073433821 (MSVCR90): (filename not available): _is_exception_typeof , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00000000773DF661) , 00000000773DF661 (ntdll): (filename not available): RtlRestoreContext , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000000380E16) , 0000000000380E16 (StarNeo): (filename not available): Controller::executeCommand , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 000000000037F705) , 000000000037F705 (StarNeo): (filename not available): Controller:rocessCommands , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00000001800122E1) , 00000001800122E1 (StarMachine): (filename not available): CommandController:rocessCommands , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000180073421) , 0000000180073421 (StarMachine): (filename not available): Machine::startServerHost , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000180067006) , 0000000180067006 (StarMachine): (filename not available): Machine::main , ERROR: SymGetSymFromAddr64, GetLastError: 487 (Address: 0000000140001297) , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000140001297) , 0000000140001297 (star-ccm+): (filename not available): (function-name not available) , ERROR: SymGetSymFromAddr64, GetLastError: 487 (Address: 0000000140004CA2) , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 0000000140004CA2) , 0000000140004CA2 (star-ccm+): (filename not available): (function-name not available) , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 000000007718F56D) , 000000007718F56D (kernel32): (filename not available): BaseThreadInitThunk , ERROR: SymGetLineFromAddr64, GetLastError: 487 (Address: 00000000773C3021) , 00000000773C3021 (ntdll): (filename not available): RtlUserThreadStart ] error: Server Error Any thoughts and advice would be brillaint. Alex |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD Wiki - We Need More Help! | Jonas Larsson | Main CFD Forum | 0 | September 26, 2005 08:11 |
Where do we go from here? CFD in 2001 | John C. Chien | Main CFD Forum | 36 | January 24, 2001 21:10 |
ASME CFD Symposium, Atlanta, July 2001 | Chris R. Kleijn | Main CFD Forum | 0 | August 21, 2000 04:49 |
Since Last June | John C. Chien | Main CFD Forum | 3 | July 12, 1999 09:38 |
Which is better to develop in-house CFD code or to buy a available CFD package. | Tareq Al-shaalan | Main CFD Forum | 10 | June 12, 1999 23:27 |