|
[Sponsors] |
January 15, 2020, 11:24 |
Connected bodies
|
#1 |
New Member
Luca
Join Date: Dec 2019
Posts: 6
Rep Power: 6 |
Hi,
I'm trying to simulate two attached dfbi bodies moving togheter underwater. The bodies should share the surface at which they are connected beacuse no fluid is desired between them. Indeed this internal surface shall have the wright pressure (i.e. hydrostatic pressure) and no additional dynamic pressure is requested. The question is if two different bodies can share one boundary (wall) and, if the answer is yes, how. Thank you. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Motorbike example: Failed 1 mesh checks | lhsihan | OpenFOAM Meshing & Mesh Conversion | 2 | December 11, 2018 07:54 |
Tecplot 360 2011 R2 preview with OpenFOAM data loader available for evaluation | scott_rumage | OpenFOAM Post-Processing | 50 | January 23, 2017 02:49 |
[Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 05:50 |
CheckMeshbs errors | ivanyao | OpenFOAM Running, Solving & CFD | 2 | March 11, 2009 02:34 |
CheckMeshbs errors | ivanyao | OpenFOAM Running, Solving & CFD | 0 | March 10, 2009 22:07 |