SU2 Compile Error

cgusty01 · May 28, 2014, 21:26

Good Afternoon,

I am running SU2_CFD and I have an error compiling some of the source files. When I edit the c++ files in the Common -> src folder, and then run the "make" and "make install" commands, these files update correctly.

However, when I edit the source files located in the bin -> src folder, these files do not compile when I "make" and "make install."

Is there any way I can fix this issue and have the program compile all of the source files every time? I am looking to implement a body force on an airfoil, so I need to be able to edit the solver c++ files.

Please advise.

Thank you,
Chris

btracey · June 5, 2014, 14:40

I do not understand what you mean by "bin -> src" folder. The SU2/bin folder has no "src" subfolder (https://github.com/su2code/SU2/tree/master/bin). Perhaps try rerunning config before make?

May 28, 2014, 21:26	SU2 Compile Error	#1
cgusty01 New Member Join Date: Mar 2014 Posts: 5 Rep Power: 12	Good Afternoon, I am running SU2_CFD and I have an error compiling some of the source files. When I edit the c++ files in the Common -> src folder, and then run the "make" and "make install" commands, these files update correctly. However, when I edit the source files located in the bin -> src folder, these files do not compile when I "make" and "make install." Is there any way I can fix this issue and have the program compile all of the source files every time? I am looking to implement a body force on an airfoil, so I need to be able to edit the solver c++ files. Please advise. Thank you, Chris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Building OpenFOAM1.7.0 from source	ata	OpenFOAM Installation	46	March 6, 2022 13:21
OpenFOAM without MPI	kokizzu	OpenFOAM Installation	4	May 26, 2014 09:17
Ansys Fluent 13.0 UDF compilation problem in Window XP (32 bit)	Yogini	Fluent UDF and Scheme Programming	7	October 3, 2012 07:24
Problem with compile the setParabolicInlet	ivanyao	OpenFOAM Running, Solving & CFD	6	September 5, 2008 20:50
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 17:51

June 5, 2014, 14:40		#2
btracey New Member Brendan Tracey Join Date: Jun 2013 Posts: 18 Rep Power: 12	I do not understand what you mean by "bin -> src" folder. The SU2/bin folder has no "src" subfolder (https://github.com/su2code/SU2/tree/master/bin). Perhaps try rerunning config before make?