CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > SU2 Shape Design

Air-7 multi species model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 13, 2013, 05:01
Default Air-7 multi species model
  #1
New Member
 
James
Join Date: Jun 2013
Posts: 16
Rep Power: 4
JAlbert is on a distinguished road
Dear all;

Has anybody tried SU2 multi species air-7 model? I am going to study hypersonic flow but do not know how to set some items in *.cfg file based on multi species Model of SU2 tutorial. Can anybody share a *.cfg file for air-7 model hypersonic case?

Thank you very much.
JAlbert is offline   Reply With Quote

Old   August 19, 2013, 21:04
Default
  #2
Member
 
Sean R. Copeland
Join Date: Jan 2013
Posts: 40
Rep Power: 4
copeland is on a distinguished road
Hi James,

Let me first say thanks for your interest in SU2. I'm one of the two primary architects for the hypersonic solvers within SU2 and I'd be happy to answer your questions as best I can.

Let me first preface my response with a caveat that the hypersonic solver within SU2 is undergoing major changes and revisions at this time. The formulation currently in place (described in detail in this publication: http://arc.aiaa.org/doi/abs/10.2514/...rchHistoryKey=) is non-standard, and as a consequence we have encountered some additional unforseen difficulties. This solver has been "frozen" and we are moving forward with a more standard formulation of the governing equations.

At the time of the "freezing", the seven-species air gas model was not supported (despite it being listed in the default configuration file), my apologies for any confusion. The five-species, N2, and Argon models should be working normally. If you have questions about setting up a configuration file, I would be happy to help with specific questions, or I can send you an email with a copy of one of my configuration files.

My strong recommendation is that if you can wait a few weeks, the new hypersonic solver will be completed and should be much easier to use. The new solver will support a host of gas models in a flexible framework. I will post updates to the solver on our code's social media pages, so please stay tuned for developments:

Facebook: https://www.facebook.com/adl.stanford?fref=ts
Twitter: https://twitter.com/su2code

I will also focus on documentation for the new solver and will be uploading a new tutorial for hypersonic calculations once the new solver is complete. Again, I apologize for any difficulties and please let me know how I can help.


Regards,
-Sean
copeland is offline   Reply With Quote

Old   September 2, 2013, 08:37
Default
  #3
New Member
 
James
Join Date: Jun 2013
Posts: 16
Rep Power: 4
JAlbert is on a distinguished road
Dear Sean

Sorry to answer your post with delay. Thanks a lot for your reply and also your code. I will wait for your new release and then I will again ask you any help.

Yours sincerely,

JAlbert
JAlbert is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions for a species transport problems (snapshots attached) aleisia FLUENT 2 October 9, 2011 04:40
using interface with Euler multi phase model karimi Main CFD Forum 0 May 22, 2011 02:39
species transport model or mixture model?HELP zhhjll FLUENT 3 March 5, 2011 16:27
multiphase model, water in air? bugra Main CFD Forum 10 January 2, 2010 14:09
mass transer in species model shoushibo FLUENT 1 December 4, 2008 10:13


All times are GMT -4. The time now is 00:00.