CFD Online URL
[Sponsors]
Home > Forums > Tecplot

Tecplot - Display Grid Lines

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 28, 2007, 01:47
Default Tecplot - Display Grid Lines
  #1
asd
Guest
 
Posts: n/a
I have exported a .cas file from fluent to Tecplot and having trouble specifying or wonder even if it is possible to display say every third or fourth mesh grid line instead of the entire mesh as this can be very messy.

thanks

  Reply With Quote

Old   June 29, 2007, 03:34
Default Re: Tecplot - Display Grid Lines
  #2
Zonexo
Guest
 
Posts: n/a
May u can try posting your qns in www.tecplottalk.com...
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 05:49
Tecplot output format in 2-D cartesian grid jinwon park Tecplot 5 April 7, 2008 07:28
On grid independent solution for pulsatile flow David FLUENT 4 June 8, 2005 17:20
how to display values of each phase in tecplot? major FLUENT 4 October 30, 2004 05:01
Cannot display grid and getting error message tom FLUENT 3 July 14, 2004 19:26


All times are GMT -4. The time now is 08:19.