Standard k-epsilon model

(Difference between revisions)
Jump to: navigation, search
 Revision as of 15:16, 21 June 2007 (view source)R.absi (Talk | contribs) (→Transport equations for standard $k$-$\epsilon$ model)← Older edit Revision as of 14:55, 22 August 2013 (view source) (Add a value for C_{3 \epsilon}, typically = -0.33)Newer edit → Line 51: Line 51: :$:[itex] - C_{1 \epsilon} = 1.44, \;\; C_{2 \epsilon} = 1.92, \;\; C_{\mu} = 0.09, \;\; \sigma_k = 1.0, \;\; \sigma_{\epsilon} = 1.3 + C_{1 \epsilon} = 1.44, \;\;\; C_{2 \epsilon} = 1.92,\;\;\; C_{3 \epsilon} = -0.33, \;\; \; C_{\mu} = 0.09, \;\;\; \sigma_k = 1.0, \;\;\; \sigma_{\epsilon} = 1.3$ [/itex] [[Category:Turbulence models]] [[Category:Turbulence models]]

Transport equations for standard k-epsilon model

For turbulent kinetic energy $k$

$\frac{\partial}{\partial t} (\rho k) + \frac{\partial}{\partial x_i} (\rho k u_i) = \frac{\partial}{\partial x_j} \left[ \left(\mu + \frac{\mu_t}{\sigma_k} \right) \frac{\partial k}{\partial x_j}\right] + P_k + P_b - \rho \epsilon - Y_M + S_k$

For dissipation $\epsilon$

$\frac{\partial}{\partial t} (\rho \epsilon) + \frac{\partial}{\partial x_i} (\rho \epsilon u_i) = \frac{\partial}{\partial x_j} \left[\left(\mu + \frac{\mu_t}{\sigma_{\epsilon}} \right) \frac{\partial \epsilon}{\partial x_j} \right] + C_{1 \epsilon}\frac{\epsilon}{k} \left( P_k + C_{3 \epsilon} P_b \right) - C_{2 \epsilon} \rho \frac{\epsilon^2}{k} + S_{\epsilon}$

Modeling turbulent viscosity

Turbulent viscosity is modelled as:

$\mu_t = \rho C_{\mu} \frac{k^2}{\epsilon}$

Production of k

$P_k = - \rho \overline{u'_i u'_j} \frac{\partial u_j}{\partial x_i}$

$P_k = \mu_t S^2$

Where $S$ is the modulus of the mean rate-of-strain tensor, defined as :

$S \equiv \sqrt{2S_{ij} S_{ij}}$

Effect of buoyancy

$P_b = \beta g_i \frac{\mu_t}{{\rm Pr}_t} \frac{\partial T}{\partial x_i}$

where Prt is the turbulent Prandtl number for energy and gi is the component of the gravitational vector in the ith direction. For the standard and realizable - models, the default value of Prt is 0.85.

The coefficient of thermal expansion, $\beta$ , is defined as

$\beta = - \frac{1}{\rho} \left(\frac{\partial \rho}{\partial T}\right)_p$

Model constants

$C_{1 \epsilon} = 1.44, \;\;\; C_{2 \epsilon} = 1.92,\;\;\; C_{3 \epsilon} = -0.33, \;\; \; C_{\mu} = 0.09, \;\;\; \sigma_k = 1.0, \;\;\; \sigma_{\epsilon} = 1.3$