|
[Sponsors] |
[ICEM] Blocking strategy for a Multi Element Airfoil (ICEM) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 3, 2013, 12:38 |
Blocking strategy for a Multi Element Airfoil (ICEM)
|
#1 |
New Member
Michael
Join Date: Dec 2012
Location: Karlsruhe, Germany
Posts: 16
Rep Power: 13 |
Hey everyone,
for some days now I'm working on a blocking strategy for a multi-element airfoil in ICEM. My plan is to use a CHgrid. I've alredy meshed the single-element one porperly, but now I'm stuck. Unfortunately, I also could not find any tutorials or proper papers regarding multi-element airfoil meshing. My plan was to use one Ogrid Block in combination with the rearmost edge of the farfield for each element to create the Cgrid. But that does not work as intended. Now I was hoping, you guys could give some ideas and new thoughts on the topic. I'm not exactly explaining, how I was trying to mesh the geometry, so I eventually can get some new suggestions. Here a screenshot of the airfoil: http://imageshack.us/photo/my-images/534/airfoilm.jpg/ mix Last edited by mix; March 4, 2013 at 08:53. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Having several dificulties with 3d airfoil meshing in ICEM CFD | Teja | ANSYS Meshing & Geometry | 14 | February 23, 2015 13:01 |
[ICEM] o grid blocking strategy? | icemaniac178 | ANSYS Meshing & Geometry | 14 | March 19, 2013 23:18 |
ICEM 5.1 to CFX Prism Element | ashish | CFX | 1 | April 6, 2005 18:32 |
multi element airfoil data | shadi memarpour | Main CFD Forum | 0 | June 20, 2004 04:33 |
Multi Element Airfoil | J.Dumas | Main CFD Forum | 2 | May 13, 2000 07:24 |