|
[Sponsors] |
[ANSYS Meshing] Unable to create inflation layer (with picture) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 13, 2013, 16:41 |
Unable to create inflation layer (with picture)
|
#1 |
New Member
René
Join Date: Mar 2013
Location: Switzerland
Posts: 5
Rep Power: 13 |
I would like to inflate a simple rectangular tube profile (30x15mm). I played around with all the inflation settings, but nothing works.
If the options "show program controlled inflation surfaces" is selected, no geometry is highlighted. So obviously this geometry cannot be inflated. But why? Any ideas what I'm doing wrong? PS: If somebody could tell me how to create this "extruded 2D mesh by one element" in V13 - that would be even better! Last edited by rene78; March 13, 2013 at 16:57. Reason: Little addition |
|
Tags |
cfx-mesh, inflation |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] Inflation layer / Element quality | Spookz | ANSYS Meshing & Geometry | 17 | February 12, 2019 04:55 |
[snappyHexMesh] SnappyHexMesh AddLayer Control | rdrr84 | OpenFOAM Meshing & Mesh Conversion | 28 | May 30, 2014 05:32 |
sample interpolation error in inflation layer | eelcovv | OpenFOAM Bugs | 2 | July 28, 2009 17:20 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
how to create boundary layer in icem cfd? | jayesh | CFX | 3 | November 24, 2005 09:00 |