|
[Sponsors] |
[ANSYS Meshing] mesh interfering with the airfoil |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 25, 2013, 06:26 |
mesh interfering with the airfoil
|
#1 |
New Member
Hoooman
Join Date: May 2013
Location: barcelona
Posts: 4
Rep Power: 13 |
I am trying to mesh NACA0012 with a modification of added flap. after i used sizing and refinement to concentrate the cells around the airfoil the mesh cells overlap my geometry as you can see in the picture. I was wondering if anyone could help me fixing it?
Regards Hooman hooman.abbasi@estudiant.upc.edu |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mesh motion with Translation & Rotation | Doginal | CFX | 2 | January 12, 2014 06:21 |
mesh size requirement for NACA0015 airfoil | zhengjg | Main CFD Forum | 0 | March 20, 2013 21:58 |
[ICEM] Dynamic mesh for a pitching airfoil | bahram.raeisi | ANSYS Meshing & Geometry | 1 | March 2, 2012 10:41 |
getting airfoil surface to be recongized for tri mesh | josip76 | ANSYS Meshing & Geometry | 4 | June 9, 2011 22:48 |
[ICEM] Can’t get 2D Blayer in hex mesh to be accurate O-block around airfoil | josip76 | ANSYS Meshing & Geometry | 2 | June 4, 2011 18:03 |