CFD Online URL
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Creating named selection of interior region

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By vasava

Reply
 
LinkBack Thread Tools Display Modes
Old   July 22, 2013, 14:27
Default Creating named selection of interior region
  #1
Member
 
Prateek Anand
Join Date: Nov 2012
Posts: 34
Rep Power: 4
Thermal_engg is on a distinguished road
Hello everyone,
In my project to simulate a heated rod kept open to atmosphere,I first created a solid cylinder representing the rod and then concentric to it, I created a much bigger solid cylinder representing the domain of fluid flow.After that, using "Boolean" operation, I subtracted the smaller cylinder from the larger one, thereby creating a cavity COMPLETELY INSIDE the big cylinder. Now how do I create the named selection for that interior cavity.
Any help is appreciated.this is rather urgent .Thnx..
Thermal_engg is offline   Reply With Quote

Old   July 25, 2013, 05:17
Default
  #2
Senior Member
 
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 463
Rep Power: 12
vasava will become famous soon enough
I suggest you dont name the interior and rather let fluent take care of it. If you name the interior boundaries they may act as 'interior'.
Thermal_engg likes this.
vasava is offline   Reply With Quote

Old   December 9, 2013, 16:05
Default Named selection of ineterior
  #3
Senior Member
 
Shamoon Jamshed
Join Date: Apr 2009
Location: Karachi
Posts: 103
Rep Power: 7
Shamoon Jamshed is on a distinguished road
Send a message via Skype™ to Shamoon Jamshed
I have a surface (wind blade) with multiple faces inside an enclosure, I have already subtracted the faces from enclosure using boolean in ansys mesher. How do I specify names of the wall surfaces of the blade. The box slect option doesnot select all the faces
Shamoon Jamshed is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
y+ and u+ values with low-Re RANS turbulence models: utility + testcase florian_krause OpenFOAM 105 October 15, 2014 13:06
Native ParaView Reader Bugs tj22 OpenFOAM Paraview & paraFoam 265 September 16, 2014 11:19
Creating named selection for a line sketch amir00251 ANSYS 6 July 31, 2012 09:02
[ANSYS Meshing] Creating named selections in ANSYS ejayalv123 ANSYS Meshing & Geometry 2 January 16, 2011 07:17
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 21:50


All times are GMT -4. The time now is 11:52.