CFD Online Logo CFD Online URL
Home > Forums > ANSYS Meshing & Geometry

[Workbench] Problem with the geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 26, 2013, 02:18
Question Problem with the geometry
New Member
Join Date: Jul 2013
Location: Switzerland
Posts: 5
Rep Power: 5
Memboro is on a distinguished road
Hello everyone,

I have a problem with my geometry. In fact I'm a new user of Ansys. I usually use Abaqus but I'm doing an internship so...

I created an assembly with CREO and I would like to import it into Ansys. I tried the format step and iges. Both put some "?" next to a part in the geometry. I read that means that some data are wrong or missing. In fact the name of a part appears three times and I don't really understand why. When I import the single part, everything works fine. It's only a problem with the assembly.

I tried to import the .asm file and to create a x_t file but with both of them, I had the error that it couldn't attach the geometry. I read that there are some changes to do in the CAD configuration manager but I don't have access since I don't have the administrator rights.

I'm using the workbench 14.5. Thanks for helping me!

PS : When I show the error, it says : Invalid "Volume". Is there a manner to heal the part?

Last edited by Memboro; July 26, 2013 at 05:35.
Memboro is offline   Reply With Quote


geometry import

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Problem with the skewness of this geometry Maralady ANSYS Meshing & Geometry 1 June 16, 2013 00:48
[ICEM] [FLUENT] 2D Geometry problem when exporting to Fluent - Unwanted walls MikeTichondrius ANSYS Meshing & Geometry 1 February 9, 2011 14:31
Transient problem with changing geometry! Fascal FLUENT 4 July 5, 2010 10:11
[GAMBIT] problem in importing Pro Engineer geometry :-( arash_7444 ANSYS Meshing & Geometry 3 June 14, 2010 02:06
vitual _ real deneb FLUENT 3 January 22, 2007 05:31

All times are GMT -4. The time now is 00:23.