CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Translation of ground plane with provided mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 15, 2013, 09:24
Default Translation of ground plane with provided mesh
  #1
New Member
 
Jack Chilvers
Join Date: Dec 2013
Location: St Neots, Cambridgeshire
Posts: 12
Rep Power: 3
jackchilvers is on a distinguished road
Dear all,

I have been provided with a structured hex H-mesh for a high-downforce aerofoil placed in proximity to the ground (which is of course the lower edge of the mesh domain). I am attempting to investigate the effect of altering the vertical distance between the aerofoil and the ground.

My question is; using ICEM, which approach can be used to easily translate the aerofoil vertically relative to the ground plane?

Thank you for reading and I look forward to any response. Apologies if any details have been omitted, please ask if you need any further information.

JC
jackchilvers is offline   Reply With Quote

Reply

Tags
icem, mesh, translation

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
The mesh file exporter failed during translation. foolboy007 ANSYS 0 November 2, 2012 15:54
[ICEM] Problem making structural mesh on a surface froztbear ANSYS Meshing & Geometry 1 November 10, 2011 09:52
[ICEM] Growing prism mesh without volume mesh and with a symmetry plane adenlan ANSYS Meshing & Geometry 0 June 14, 2011 03:53
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 20:43


All times are GMT -4. The time now is 11:27.