CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Lines do not snap to curvature in pre-mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 11, 2016, 09:39
Default Lines do not snap to curvature in pre-mesh
  #1
Member
 
Join Date: Dec 2012
Posts: 74
Rep Power: 5
pizzaspinate is on a distinguished road
Hey,

I want to mesh a cylinder in the flow. I O-grid it and associate the lines of the O-grid to the curves (see pictures). When pre-meshing it the mesh does not follow the curves but rather straight lines. Why is that and even more important how can I fix that?
Attached Images
File Type: png ICEM problem 4.PNG (31.9 KB, 9 views)
pizzaspinate is offline   Reply With Quote

Old   January 15, 2016, 14:01
Default
  #2
Senior Member
 
Gweher's Avatar
 
Gwenael H.
Join Date: Mar 2011
Location: Switzerland
Posts: 118
Rep Power: 9
Gweher is on a distinguished road
Sometimes this can happen in ICEM. You should first check under the pre-mesh that you didn't activate "no projection". In the model tree, under blocking, rmb on premesh and check that "project faces" or "project edges" is selected.

If this is already the case you can update the associations, under the blocking tab > associate icon > Update associations (6th icon) > apply.

If this still doesn't solve your problem you should disassociate all the blocking from the geometry (disassociate all vertices, edges and faces) and start over again.

Have fun
Gweher is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 27 November 2, 2015 18:04
sliding mesh problem in CFX Saima CFX 45 September 22, 2015 10:53
snappyHexMesh doesnt snap staustrahltriebwerk OpenFOAM Native Meshers: snappyHexMesh and Others 43 July 25, 2015 15:04
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 20:43
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 09:38


All times are GMT -4. The time now is 07:10.