|
[Sponsors] |
|
November 10, 2009, 14:22 |
Uncovered Faces
|
#1 |
New Member
Jorge
Join Date: Nov 2009
Posts: 2
Rep Power: 0 |
Hello everybody,
I'm drawing a mesh of a geometry made up of a fluid (air) and a solid, and what I want to mesh is the fluid but when I do a 2D mesh check I get an "Uncovered Faces" error. A tutorial suggests manually joining any conflicting nodes, but I have more than 3000....what should I do? The plan is to export this mesh from ICEM CFD to Fluent with a BC which if I let the program do a "fix" it considers it to be a solid shape with an interior mesh. how can i fix it by keeping the boundeary conditions in every edge? Thanks. |
|
November 11, 2009, 22:25 |
Hmm...
|
#2 |
Senior Member
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47 |
The uncovered faces error shouldn't happen with a 2D mesh. The equivalent should be "missing internal edges". Where are you doing your mesh check?
Basically, Uncovered faces means that you have volume elements with an exposed side. It should be covered by a shell or another volume element. Missing internal edges means that you have a 2D elements with an exposed side. It should be covered by a line element or another 2D element. When you get either error (Uncovered faces or missing internal edges), you should push the [Fix] button. This will prompt you to select or type in a new part name. It will create shell elements (or line elements) to cover the "uncovered" faces (or edges) and put the new elements in the part name you selected. You will then have a valid boundary to take to Fluent and use as a wall or internal wall or whatever. Simon |
|
November 13, 2009, 09:49 |
Uncovered faces
|
#3 |
New Member
Jorge
Join Date: Nov 2009
Posts: 2
Rep Power: 0 |
Hi,
I think i solved the problem, I had forgotten to associate the edge to the curve... Thank you |
|
November 13, 2009, 11:12 |
Oh yea...
|
#4 |
Senior Member
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47 |
Oh, you were using hexa...
That is a common problem for fluent users who don't realize that Hexa only creates those boundary line elements if you associate with a curve. Usually, they complain about a null pointer error. Glad you figured it out. |
|
July 17, 2012, 20:17 |
|
#5 |
Member
Khayyamian
Join Date: Dec 2010
Posts: 46
Rep Power: 15 |
I would like to delete the post! but I cant.
Last edited by hadikhayyamian; July 20, 2012 at 16:03. Reason: I would like to delete the post! but I cant. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DecomposePar unequal number of shared faces | maka | OpenFOAM Pre-Processing | 6 | August 12, 2010 09:01 |
Problem in IMPORT of ICEM input file in FLUENT | csvirume | FLUENT | 2 | September 9, 2009 01:08 |
[Technical] Uncovered faces found ???? | hansel | OpenFOAM Meshing & Mesh Conversion | 5 | July 10, 2009 14:05 |
[blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 07:36 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 10:37 |