|
[Sponsors] |
August 13, 2010, 04:23 |
Moving Mesh on a Savonius VAWT
|
#1 |
Member
Join Date: Dec 2009
Posts: 41
Rep Power: 16 |
Hi guys,
i have a question about the geometry of a 2d savonius with moving mesh. I am developing a chart of the various coefficients (cd,cl,cm) for different incidence angles with a velocity of 20 m/s (inlet). I have already made the static study with a mesh of about 2 millions cells : my vawt is large about 2,4m and my domain is 20mx20m. Now to make the moving mesh,what have i to do?I know i have to make a smaller domain near the profile (about 2,5x2,5m) with gambit,but i am not sure. Once i have made the inner domain and splitted the faces how i proceed?I have read the tutorial about the moving mesh for fluent but i have not well understood how proceed. Thanks guys,regards, Richard |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
moving mesh in parallel mode | Karteek | Siemens | 4 | June 16, 2008 04:12 |
CavitatingFoam with a moving mesh mass conservation error | idosil | OpenFOAM Running, Solving & CFD | 3 | November 27, 2007 17:27 |
How to control Minximum mesh space? | hung | FLUENT | 7 | April 18, 2005 09:38 |