|April 29, 2011, 04:09||
Join Date: May 2010
Location: Lund, Skåne, Sweden
Posts: 143Rep Power: 6
I have some problem.
I have a box which is divided into to smaller boxed, then naturally they share on surface.
I do like this.
4.create body, one upboxcells and one downboxcells
5.create parts, one upbox and one down box
In 4. and 5. they have a combined surface.
6. create blocking, here I again choose the upboxcells and downboxcells, creating a 3D box. I here have to select merge the 3D blocks
7. Pre-mesh params , choose the wanted resolution, make sure that the x and y cells are the same for both "boxes"
8. save unstruct mesh
9 load from blocking
10 output with BCs. fluid for the cells and walls for the rest.
11 try to run fluentMeshToFoam in OpenFoam and get error
dimension of grid: 3
Creating shapes for 3-D cells
--> FOAM FATAL ERROR:
Cannot find match for first face. cell model: hex first model face: 4(0 4 7 3) Mesh faces:
From function create3DCellShape(const label cellIndex, const labelList& faceLabels, const labelListList& faces, const labelList& owner, const labelList& neighbour, const label fluentCellModelID)
in file create3DCellShape.C at line 185.
Anyone who can help ?
|Thread||Thread Starter||Forum||Replies||Last Post|
|[ICEM] How to generate sunstructured "all-tri patch-dependant" surface mesh in ICEM?||jash||ANSYS Meshing & Geometry||19||July 23, 2013 18:48|
|boundaries with gmshToFoam||ouafa||Open Source Meshers: Gmsh, Netgen, CGNS, ...||7||May 21, 2010 12:43|
|Error : Self intersecting surface mesh, computing intersections & Error : Impossible||velan||Open Source Meshers: Gmsh, Netgen, CGNS, ...||0||June 29, 2009 00:48|
|Problem with Gmsh||nishant_hull||Open Source Meshers: Gmsh, Netgen, CGNS, ...||17||December 7, 2007 01:33|
|CFX4.3 -build analysis form||Chie Min||CFX||5||July 12, 2001 23:19|