CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

ICEM crashing before meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 2, 2011, 12:29
Default ICEM crashing before meshing
  #1
New Member
 
Mehul
Join Date: Mar 2009
Location: Bangalore
Posts: 3
Rep Power: 8
Mehul is on a distinguished road
Hi,

I am facing a strange problem in ICEM CFD. When I try to start the mesh by Compute mesh for one of complex geometry, ICEM initially goes fine. After some time, it crahses without giving any mesh ( It does not create any *.uns file). I obserevd that, when it tries to split edges at surfaces or somtimes at trilateral round at curve during computing mesh, It crahes. I appreciate, if any body can share their experience, if they would have faced same problem. As far as my my geometry is considered, it is almost without any holes. Is it due to huge no of curves or any deformed surfaces. For the same geometry I was able to perform mesh sometime back, but now I have added few parts, and not able to do the mesh. I would request any experts to give their opinion. One more thing, I would like to add is, when I increase scale factor too much, then I get the mesh, but that is with many holes, which is not acceptable.

Thanks,
Mehul
Mehul is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] complex 2D meshing on ICEM kassab ANSYS Meshing & Geometry 26 April 14, 2014 21:02
Meshing a Mixing Plane using ICEM Will Anderson FLUENT 0 November 6, 2010 18:08
[ICEM] ICEM meshing problem xyq102296 ANSYS Meshing & Geometry 6 October 28, 2010 10:09
[ICEM] Need help in ICEM CFD Mapped Meshing falconf16 ANSYS Meshing & Geometry 3 February 19, 2010 15:21
Missing tets along line when meshing with ICEM CFD Georges P. Côté CFX 6 March 23, 2006 01:34


All times are GMT -4. The time now is 23:32.