CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS

post-processing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 6, 2012, 15:42
Default post-processing
  #1
Member
 
Vitaly
Join Date: Jan 2012
Posts: 32
Rep Power: 5
Vitaly is on a distinguished road
Hello,

What I want to do should be very easy, but I can't find a way to do it.

I have a specific surface with a WSS contour plot. All I want to do is output a txt file with the coordinates of each facet centroid and the WSS value at that facet.

Any advice?

Thanks,

Vitaly
Vitaly is offline   Reply With Quote

Old   March 8, 2012, 07:18
Default
  #2
Member
 
Max
Join Date: May 2011
Location: old europe
Posts: 69
Rep Power: 6
murx is on a distinguished road
If you are using CFD-Post, the way I would use is:
- insert a plane at the location where you are interested in the WSS values
- file --> export
- under Locations, select the Plane and select the variables on the bottom... which would be X,Y,Z, and the Wall Shear values you are interested in
murx is offline   Reply With Quote

Old   March 8, 2012, 11:06
Default
  #3
Member
 
Vitaly
Join Date: Jan 2012
Posts: 32
Rep Power: 5
Vitaly is on a distinguished road
Thanks for the reply...

That is I have been doing, but I would like to be able to loop over a face in a UDF and get the values so that I could use them in the UDF.

Thanks,

Vitaly
Vitaly is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ansys Post processing ano999 ANSYS 1 May 27, 2011 16:24
NO model vs post processing in coal combustion,CFX sakalido CFX 1 April 15, 2011 14:07
post processing for KIVA dirga Main CFD Forum 5 April 23, 2009 10:58
Question about post processing qtian OpenFOAM Post-Processing 0 July 24, 2007 12:44
Post Processing in FEM Abhijit Tilak Main CFD Forum 0 April 26, 2004 11:59


All times are GMT -4. The time now is 18:39.