CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How to generate the mesh on the surface in prostar

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 11, 2001, 22:12
Default How to generate the mesh on the surface in prostar
  #1
raymond
Guest
 
Posts: n/a
I want to set up the grid system in the prostar, at first, I create four closed splines with two vertices at each end and add some fixed vertices on each of splines. Then I want to create shell with PATCH command. Then the problem is that I could not divide the patch with the cell that just passing through those fixed vertices. Should I do PATCH command one by one?
  Reply With Quote

Old   September 13, 2001, 05:48
Default Re: How to generate the mesh on the surface in pro
  #2
Philip Jones
Guest
 
Posts: n/a
If you want to match exactly a vertex on a spline then you need to mark those vertices with a negative sign (used for discontinuities) and the prostar does its best to match these vertices:



Philip
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need someone to generate mesh RA FLUENT 7 May 4, 2007 11:36
Problem when trying to generate a new mesh gaottino OpenFOAM Meshing & Mesh Conversion 0 June 30, 2006 07:51
Mesh Generation using Prostar Anindya CD-adapco 3 June 5, 2001 07:40
How to generate grid system with a curved surface Jing Ren CD-adapco 3 March 13, 2001 12:58
Gambit -> Prostar mesh ? sangrar FLUENT 1 March 6, 2000 05:26


All times are GMT -4. The time now is 12:40.