CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Other] Problem when trying to generate a new mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 30, 2006, 07:51
Default Problem when trying to generate a new mesh
  #1
New Member
 
Gabriele Ottino
Join Date: Mar 2009
Location: Turin, Piemonte, Italy
Posts: 5
Rep Power: 17
gaottino is on a distinguished road
Hi,
I have a problem when I'm trying to generate a mesh. I created a file blockMeshDict, and then I write the command: blockMesh <root> <case>.
This is what is wrote in the shell window:

Reading block mesh description dictionary

Creating block mesh

Creating blockCorners

Creating curved edges

Creating blocks

Creating patches

Creating block mesh topology

Default patch type set to empty

Check block mesh topology

Basic statistics
Number of internal faces : 27
Number of boundary faces : 66
Number of defined boundary faces : 66
Number of undefined boundary faces : 0

Checking patch -> block consistency

Creating block offsets

Creating merge list .

Creating points

Creating cells

Creating patches

Creating mesh from block mesh

Default patch type set to empty

Creating merge patch pairs

Foam::error::printStack(Foam:stream&)
Foam::sigSegv::sigSegvHandler(int)
/lib64/tls/libc.so.6 [0x2aaaab9394c0]
blockMesh [0x428a3b]
__libc_start_main
__gxx_personality_v0

I suppose I do an error in creating the file blockMeshDict, but I don't know and I don't understand what kind of error.
Could someone help me,please?
Thanks a lot.
Best regards
gaottino is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh quality problem for displacementSBRStress motion solver zhaozhenkai OpenFOAM 0 January 22, 2017 11:02
Gambit problems Althea FLUENT 22 January 4, 2017 03:19
[ICEM] Problem with using the Delaunay volume mesh method manahara ANSYS Meshing & Geometry 12 December 25, 2014 21:54
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
[ICEM] problem of Non-concidence mesh jeevankumarb ANSYS Meshing & Geometry 1 March 4, 2011 08:47


All times are GMT -4. The time now is 07:00.