CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

fine mesh ==> coarse mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 10, 2003, 00:51
Default fine mesh ==> coarse mesh
  #1
Mahbub
Guest
 
Posts: n/a
How can I turn the fine mesh into coarse mesh (i. e. I refined some cells by mistake)?
  Reply With Quote

Old   October 10, 2003, 12:12
Default Re: fine mesh ==> coarse mesh
  #2
Pauli
Guest
 
Posts: n/a
If you refined with the cmrefine command, and you have the appropriate casename.refi file, you can use cmunrefine.

If you used crefine, their is no "undo" option. Assuming you haven't done a save, you can resume your original model file.
  Reply With Quote

Old   October 10, 2003, 14:09
Default Re: fine mesh ==> coarse mesh
  #3
allan
Guest
 
Posts: n/a
you also use the command crse, but make sure that you the gid you coursen can be coursened by 2x2x2

allan
  Reply With Quote

Old   October 11, 2003, 01:19
Default Re: fine mesh ==> coarse mesh
  #4
Mahbub
Guest
 
Posts: n/a
Thanks!!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create fine mesh that grows to coarse mesh (Urgent CZ FLUENT 1 January 3, 2009 11:36
Initial condition data file from coarse mesh case Kushagra FLUENT 1 July 25, 2008 21:53
HOW turbulene Grid (avoid too fine or too coarse)? Toulouser FLUENT 1 February 1, 2007 04:47
CFdesign behaviour in coarse and fine mesh Farhad Autodesk Simulation CFD 0 May 30, 2006 10:10
streamfunction from u and v on a coarse mesh ryoga Main CFD Forum 0 February 1, 2002 19:20


All times are GMT -4. The time now is 00:31.