CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

2-d problem BOUNDARIES IN prostar

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 19, 2004, 06:44
Default 2-d problem BOUNDARIES IN prostar
  #1
stk
Guest
 
Posts: n/a
IN 2-D DIMENSION, THE BOUNDARIES HOW I CAN DEFINE THEM WITHOUT THE CURSOR, BUT ONLY WITH THE EDGES, WHICH ARE NOT SURFACES IN 2-D BUT SIMPLE LINES???
  Reply With Quote

Old   March 19, 2004, 08:03
Default Re: 2-d problem BOUNDARIES IN prostar
  #2
alex
Guest
 
Posts: n/a
STAR doesn't run 2D cases in this way: for a 2D simulation you require a 3D mesh, but there is only one cell in the third dimension. Change your mesh and all your boundaries will have a face, not just a line.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
block generation problem by PROSTAR Mehdi CD-adapco 0 April 26, 2006 05:34
Problem with export data from prostar Shanta CD-adapco 1 November 28, 2004 00:48
boundaries of my problem muhkiraz FLUENT 2 January 23, 2004 07:13
Problem: graphics display in prostar main window Jiaying Xu CD-adapco 8 February 14, 2002 09:08
Riemann problem at boundaries K. I. Chan Main CFD Forum 0 December 10, 2000 23:56


All times are GMT -4. The time now is 00:16.