CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

how to get the change of temperature of a wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 29, 2004, 13:47
Default how to get the change of temperature of a wall
  #1
shoeb
Guest
 
Posts: n/a
In a heat transfer problem I have a cold wall. after processing the temperature of the wall changes. Now i want to get the temperature data of the wall. so I can get the temperature difference cell by cell.
  Reply With Quote

Old   November 29, 2004, 14:16
Default Re: how to get the change of temperature of a wall
  #2
Samir
Guest
 
Posts: n/a
Yes, you surely can. But, you have to figure out how!
  Reply With Quote

Old   November 30, 2004, 14:44
Default Re: how to get the change of temperature of a wall
  #3
Volker
Guest
 
Posts: n/a
In the Star GUI go to Analysis Controls->Output Controls->Analysis Output. You can select wall temperature in Additional Output Data. In case you've already done the simulation, do a restart with 1 iteration with the new setting.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
change operating temperature Mahyar FLUENT 0 May 29, 2008 05:24
Writing UDF for Unsteady Temperature change ? Baggi FLUENT 0 April 12, 2006 17:27
change temperature unit suti FLUENT 5 August 3, 2005 00:06
change the temperature unit cha s n FLUENT 1 February 22, 2005 23:49
temperature change + steady state John FLUENT 5 January 16, 2003 11:41


All times are GMT -4. The time now is 23:46.