how to get the change of temperature of a wall

November 29, 2004, 13:47

In a heat transfer problem I have a cold wall. after processing the temperature of the wall changes. Now i want to get the temperature data of the wall. so I can get the temperature difference cell by cell.

November 29, 2004, 14:16

Yes, you surely can. But, you have to figure out how!

November 30, 2004, 14:44

In the Star GUI go to Analysis Controls->Output Controls->Analysis Output. You can select wall temperature in Additional Output Data. In case you've already done the simulation, do a restart with 1 iteration with the new setting.

November 29, 2004, 13:47	how to get the change of temperature of a wall	#1
shoeb Guest Posts: n/a	In a heat transfer problem I have a cold wall. after processing the temperature of the wall changes. Now i want to get the temperature data of the wall. so I can get the temperature difference cell by cell.

November 29, 2004, 14:16	Re: how to get the change of temperature of a wall	#2
Samir Guest Posts: n/a	Yes, you surely can. But, you have to figure out how!

November 30, 2004, 14:44	Re: how to get the change of temperature of a wall	#3
Volker Guest Posts: n/a	In the Star GUI go to Analysis Controls->Output Controls->Analysis Output. You can select wall temperature in Additional Output Data. In case you've already done the simulation, do a restart with 1 iteration with the new setting.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
change operating temperature	Mahyar	FLUENT	0	May 29, 2008 06:24
Writing UDF for Unsteady Temperature change ?	Baggi	FLUENT	0	April 12, 2006 18:27
change temperature unit	suti	FLUENT	5	August 3, 2005 01:06
change the temperature unit	cha s n	FLUENT	1	February 22, 2005 23:49
temperature change + steady state	John	FLUENT	5	January 16, 2003 11:41