CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Help me~ERROR#266

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 1, 2005, 05:20
Default Help me~ERROR#266
  #1
Ben Lu
Guest
 
Posts: n/a
My model is pipe form.There are two inlet and vertical each other,and one outlet.The values of two inlets are used by table. Time model is transient.Turbulence model is les/smagorinsky.After i star the Starcd,but Starcd shows the error "Error226 Error occurs in reading table

Form problem file,and its data are ingnored." And Prostar ourput shows the waring" temporal discretization is set to implicit . crank-nicholson is recommend for Les turbulence models." Although i change "implicit"to "crank-nicholson",but starcd shows the error "Error 404 analysis must be transient and cannot use upwinding for velocities to use an les turbulence model" Although i already set time model to transient and use by CD ,Starcd still shows the same message.Everybody,how to solve above all errors?help me~thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
strange fluent error: Primitive Error at Node 0 Jean-Baptiste FLUENT 6 September 20, 2012 16:07
error in COMSOL:'ERROR:6164 Duplicate Variable' bhushas Main CFD Forum 1 May 30, 2008 04:35
"Error: Floating point error: invalid number" MI Kim FLUENT 2 January 4, 2007 11:00
Fatal error error writing to tmp No space left on device maka OpenFOAM Installation 2 April 3, 2006 08:48
Error: Floating point error: invalid number Bob FLUENT 3 June 3, 2005 18:11


All times are GMT -4. The time now is 02:25.