CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

HOW TO "UNDO " IN STAR -CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 20, 2005, 04:38
Default HOW TO "UNDO " IN STAR -CD
  #1
ztdep
Guest
 
Posts: n/a
I WANT TO PERFORM THE UNDO IN STAR-CD ,PLEASE HELP ME

REGARDS
  Reply With Quote

Old   October 20, 2005, 08:29
Default Re: HOW TO "UNDO " IN STAR -CD
  #2
Jamie
Guest
 
Posts: n/a
There is no "undo" in STAR-CD. There is "vundo" for vertex operations. If you are going to make a change to the model that you might not do correctly the first time, it's best to save the model first. Then if the result isn't what you were expecting, you can resume from the last save (File --> Resume). You can also use the "recover" command, which executes previous commands from the .echo file. Check the help on "reco." (On the command line: help reco)
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to export a mesh from star design to star cd aounallah CD-adapco 4 March 6, 2009 07:22
problem to find undo mojtaba CD-adapco 4 January 24, 2008 20:44
Star Design to Star-CD(Prostar) AB CD-adapco 5 October 28, 2004 12:21


All times are GMT -4. The time now is 19:41.