CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Loading data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 6, 2006, 10:13
Default Loading data
  #1
Konstantinos
Guest
 
Posts: n/a
Hi,

I get this error message in post processing:

" **ERROR - ACOEF REQUIRES LOADING OF FX,FY,FZ WALL DATA"

How do i load the wall data?

Thanks
  Reply With Quote

Old   March 6, 2006, 11:17
Default Re: Loading data
  #2
William Blake
Guest
 
Posts: n/a
http://www.adapco-online.com/adapco_...t/drpost9.html

  Reply With Quote

Old   March 6, 2006, 11:52
Default Re: Loading data
  #3
Konstantinos
Guest
 
Posts: n/a
Thanks, this link was really usefull. As I understand from the link though, in order to get lift and drag, I must have FX FY and FZ wall data, which I think I dont because they dont appera in PLIST. Is there anyway of getting them? Or otherwise, is there anything I should before I start running the analysis so that they are stored?
  Reply With Quote

Old   March 6, 2006, 14:54
Default Re: Loading data
  #4
William Blake
Guest
 
Posts: n/a
Analysis Output -- Additional Output Data -- Shear Force

  Reply With Quote

Old   March 6, 2006, 15:49
Default Re: Loading data
  #5
Konstantinos
Guest
 
Posts: n/a
Thanks, one last thing though, does this get the data after the processing or should I chose it before running prostar so that i has them at the end?
  Reply With Quote

Old   March 6, 2006, 18:22
Default Re: Loading data
  #6
William Blake
Guest
 
Posts: n/a
You need to calculate at least one more iteration to get the data.

  Reply With Quote

Old   March 6, 2006, 20:07
Default Re: Loading data
  #7
zisper
Guest
 
Posts: n/a
Actually, you can run it re-run it for 0 iterations just to get star to calculate new post data.
  Reply With Quote

Old   March 7, 2006, 05:40
Default Re: Loading data
  #8
Konstantinos
Guest
 
Posts: n/a
How can I run an iteration withouth overwriting the existing .pst file?
  Reply With Quote

Old   March 7, 2006, 06:18
Default Re: Loading data
  #9
kris
Guest
 
Posts: n/a
analysis control -> analysis ouput -> backup frequency setting !

$star -restart (above V3.20 and linux)

or

edit "star.prob" -> at first line and space, 1 -> 2(restart) ->save->exit(bellow v3.20)

good luck

  Reply With Quote

Old   March 7, 2006, 06:34
Default Re: Loading data
  #10
Mork
Guest
 
Posts: n/a
Or you could just make a copy of your post file...
  Reply With Quote

Old   March 8, 2006, 06:50
Default Re: Loading data
  #11
Konstantinos
Guest
 
Posts: n/a
When running the analysis, with Shear Force enabled from the start, does it calculate only the shear force or does it calculate everything it normally does as well as the shear force?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit geometry creation: loading data to gambit C Ariyaratne FLUENT 10 March 17, 2011 17:39
UDF Error while loading Sujay S FLUENT 8 November 12, 2007 23:30
Loading data from previous simulations. Ale FLUENT 2 September 9, 2003 12:12
Loading data into graph reg. from external file Julie Polyakh CD-adapco 0 July 20, 2003 14:27
Loading transient data of moving grid leo CD-adapco 3 April 9, 2003 01:35


All times are GMT -4. The time now is 17:23.