CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Floating Point Exception in STAR CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 31, 2008, 06:48
Default Floating Point Exception in STAR CCM+
  #1
Sheila
Guest
 
Posts: n/a
Hello everyone,

I am a new user of STAR CCM+. I am modeling downflow heat exchanger and when I run for leak detection (all the holes are patched up) it gives me the following error,

"Server Error: floating point exception [Invalid operation] {In=[Machine::main], Command=Unknown Command, Synchronized=true}"

The output window shows that there are no paths/leaks found. Any idea whats going on?

Thanks in advance. Sheila
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Floating point exception? Ricky Wong FLUENT 9 February 15, 2014 23:49
Floating Point Exception?? Alex FLUENT 2 April 21, 2009 01:29
Floating point exception gareth__it_power OpenFOAM Running, Solving & CFD 2 February 16, 2009 13:55
floating point exception mojtaba CFX 2 November 15, 2008 07:58
floating point exception Mojtaba CFX 0 November 1, 2008 02:54


All times are GMT -4. The time now is 06:08.