|
[Sponsors] |
|
January 10, 2011, 10:56 |
need some help for meshing on BWB
|
#1 |
New Member
mohd afiq
Join Date: Jan 2011
Location: malaysia
Posts: 2
Rep Power: 0 |
hi
i need some help for meshing value on BWB UAV model that i have designed on CATIA..this model about 0.348 m span, 0.03995 m2 wing-body plan form area, 0.114 m mean chord..i already run this problem but,get wrong result..i think that the mesh i put is totally wrong..need some help please.. tq |
|
April 1, 2011, 18:43 |
|
#2 |
New Member
ara
Join Date: Apr 2011
Posts: 8
Rep Power: 15 |
Try 2mm for base size. turn on curviture refinment on for the remesher, cad projection for the wraper. min size 25% of base, target 200% of the target. make sure you put prism layers everywhere, start with 3 layers 1mm, then adjust that based on Y+ value.
|
|
January 25, 2012, 04:18 |
|
#3 |
New Member
SANTOSH
Join Date: Jan 2012
Posts: 10
Rep Power: 14 |
which airfoil u used for BWB
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
first Internal Engine simulation with STAR-CCM+ | Weisser | Siemens | 8 | January 10, 2011 10:53 |