Short Term CFD Project Looking at the Optimisation of a Nozzle Design

A_Aug · May 29, 2015, 10:16

Hi,

I'm interested in finding a freelance CFD engineer to run some simulations on various nozzle designs. The nozzle is part of a handheld medical device designed to measure the pressure within the eye. The set up of the system that would require analysis is a piston discharging a volume of air into a tube approximately 100mm long and 4mm internal diameter into a small chamber which is attached to a nozzle and open to the atmosphere. The aim is to optimise the design of the nozzle to produce a coherent jet of air with the required mass flow and velocity characteristics.

This would be a short term contract and any interested individuals would be required to have their own CFD package and license. They would also be required to be on site at the company from time to time and so should be based within commutable distance from Windsor, UK.

Thank you.

momentum-analysis · May 29, 2015, 11:29

Hi,

I'm very interested in this project - I use open-source software and have experience with micro scale flows and jetting studies/characteristics. I am also a commutable distance from Windsor. Please have a look at my website for a little more detail (www.momentum-analysis.co.uk) and if you would like to discuss further please drop me an email at info@momentum-analysis.co.uk and we can arrange a t/c or meeting in person.

Best Regards,

Simon.

brg_mohajer · November 6, 2016, 04:22

Hi,
Do you still have offers like that?
Please feel free to contact me.
behrang.mohajer@mail.polimi.it

May 29, 2015, 10:16	Short Term CFD Project Looking at the Optimisation of a Nozzle Design	#1
A_Aug New Member Join Date: May 2015 Posts: 1 Rep Power: 0	Hi, I'm interested in finding a freelance CFD engineer to run some simulations on various nozzle designs. The nozzle is part of a handheld medical device designed to measure the pressure within the eye. The set up of the system that would require analysis is a piston discharging a volume of air into a tube approximately 100mm long and 4mm internal diameter into a small chamber which is attached to a nozzle and open to the atmosphere. The aim is to optimise the design of the nozzle to produce a coherent jet of air with the required mass flow and velocity characteristics. This would be a short term contract and any interested individuals would be required to have their own CFD package and license. They would also be required to be on site at the company from time to time and so should be based within commutable distance from Windsor, UK. Thank you.

November 6, 2016, 04:22	more offers	#3
brg_mohajer New Member Behrang Mohajer Join Date: Nov 2014 Location: Toronto Posts: 6 Rep Power: 11	Hi, Do you still have offers like that? Please feel free to contact me. behrang.mohajer@mail.polimi.it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD Online Celebrates 20 Years Online	jola	Site News & Announcements	22	January 31, 2015 00:30
CFD software for natural ventilation of building & urban design	Christian Bosselmann	Main CFD Forum	6	April 1, 2011 03:00
Design Optimisation	Abhinav Sona	Main CFD Forum	5	June 30, 2004 11:13
Info: Short Course On Thermal Design of Electronic Equipment	Arnold Free	Main CFD Forum	0	August 10, 1999 10:18
CFD - Trends and Perspectives	Jonas Larsson	Main CFD Forum	16	August 7, 1998 16:27

May 29, 2015, 11:29		#2
momentum-analysis New Member Simon Join Date: Jun 2014 Posts: 9 Rep Power: 11	Hi, I'm very interested in this project - I use open-source software and have experience with micro scale flows and jetting studies/characteristics. I am also a commutable distance from Windsor. Please have a look at my website for a little more detail (www.momentum-analysis.co.uk) and if you would like to discuss further please drop me an email at info@momentum-analysis.co.uk and we can arrange a t/c or meeting in person. Best Regards, Simon.