CEL function of pressure

foxof90 · June 14, 2014, 07:26

Hi!

I am new in working with CFX software. I have created rectangular prism (3D) in which there is a single cylinder with heat generation. And my question is how to create function which describes high Pressure (101325 Pa) on the bottom of those rectangular which changes lienarly to low Pressure (0 Pa) surfece on the top of this rectangular? How to introduce those function into my model to receive pressure distribution as on the example picture?

http://imagizer.imageshack.us/a/img820/1365/f2jf.png

I would be very grateful for any help.

Thanks in advance!

ghorrocks · June 15, 2014, 06:46

A CEL expression like:

Pressure = 10 [Pa/m] * z

Can be used to set a pressure boundary condition or initial condition.

June 14, 2014, 07:26	CEL function of pressure	#1
foxof90 New Member Tomek Join Date: May 2014 Posts: 1 Rep Power: 0	Hi! I am new in working with CFX software. I have created rectangular prism (3D) in which there is a single cylinder with heat generation. And my question is how to create function which describes high Pressure (101325 Pa) on the bottom of those rectangular which changes lienarly to low Pressure (0 Pa) surfece on the top of this rectangular? How to introduce those function into my model to receive pressure distribution as on the example picture? http://imagizer.imageshack.us/a/img820/1365/f2jf.png I would be very grateful for any help. Thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF for specific heat as function of pressure	ghobold	Fluent UDF and Scheme Programming	20	August 22, 2019 08:19
sonicFoam - pressure driven pipe: flow continuity violation and waveTransmissive BC	Endel	OpenFOAM Running, Solving & CFD	3	September 11, 2014 16:29
Setting up the pressure variation due to tornado in a duct(UDF)+animation	guillaume1990	FLUENT	0	March 3, 2014 11:59
Neumann pressure BC and velocity field	Antech	Main CFD Forum	0	April 25, 2006 02:15
Hydrostatic pressure in 2-phase flow modeling (CFX4.2)	HB &DS	CFX	0	January 9, 2000 13:19

June 15, 2014, 06:46		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	A CEL expression like: Pressure = 10 [Pa/m] * z Can be used to set a pressure boundary condition or initial condition.