CFD Online URL
[Sponsors]
Home > Forums > CFX

Heat model in multiphase

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 21, 2001, 02:10
Default Heat model in multiphase
  #1
TUM
Guest
 
Posts: n/a
Dear all, I try to sim. heat transfer of solid in liquid phase flow in straigth pipe. When i used multiphase option, there is no option of heat model/thermal...to set the temp. at boundary/inlet. that if difference from 1 phase option. Then i try to used Fluid dependece ...option and specify the value of Temp. of solid and liquid in fluid (isothermal option). But ofter simulation, both temp. of solid and liquid are the same value that I inputed it. Why there is no temp. change of both phase . Please help me suggestion. Thank you
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiphase model in Fuel Cell module E-Font FLUENT 0 March 9, 2011 15:44
question about Heat transfer between two phases with VOF model sooroo3 FLUENT 0 February 15, 2011 04:24
Water vapour condensation in CFX-5.7.1 hdj CFX 1 November 27, 2005 08:15
is there heat transfer option in multiphase model gayaz FLUENT 1 July 16, 2003 12:13
Multiphase Mixture Model fluent5.4 Julia Kullmann FLUENT 0 March 9, 2001 06:13


All times are GMT -4. The time now is 23:47.