How import the mesh generated in fluent5.4

November 5, 2003, 22:22

Now I have a model and mesh generated in fluent5.48,and I want import it into cfx5.6,how can I make it? Ask all you guys for appreciating help!

Thanks 1

November 6, 2003, 17:51

If you have knowledge/documentation of the Fluient grid format then you could write your own grid importer using the cfx user defined grid import library?

Neale

November 6, 2003, 23:18

Have you considered ICEM CFD? ICEM can read a Fluent mesh, just not sure abouth the version.

cheers,

Derrek

November 7, 2003, 20:03

Great thanks at first!

You mean I can read the mesh by use of ICEM-CFD,and then export to the proper format which cfx-5.6 can use?

November 7, 2003, 20:05

Thanks!

It is a great pity that I havenot such knowledge of the Fluient grid format!Do you have such expierence which you are willing to share with our guys?

November 10, 2003, 18:17

I don't know what the Fluent format is. Perhaps you could ask your Fluent service rep? I was given the impression one time that the Fluent documentation describes the format.

Neale

November 10, 2003, 23:38

yes, that is right!

November 13, 2003, 03:35

Thanks a lot! I will try now!

November 13, 2003, 19:54

Try using a patran neutral file export from Fluent (.neu), and then import it into CFX-Pre. That has worked for me.

November 18, 2003, 09:17

Yes,it really worked.Thank you very much!

I have successly made it!

November 5, 2003, 22:22	How import the mesh generated in fluent5.4	#1
Gukuang Guest Posts: n/a	Now I have a model and mesh generated in fluent5.48,and I want import it into cfx5.6,how can I make it? Ask all you guys for appreciating help! Thanks 1

November 6, 2003, 17:51	Re: How import the mesh generated in fluent5.4	#2
Neale Guest Posts: n/a	If you have knowledge/documentation of the Fluient grid format then you could write your own grid importer using the cfx user defined grid import library? Neale

November 6, 2003, 23:18	Re: How import the mesh generated in fluent5.4	#3
derrek Guest Posts: n/a	Have you considered ICEM CFD? ICEM can read a Fluent mesh, just not sure abouth the version. cheers, Derrek

November 7, 2003, 20:03	Re: How import the mesh generated in fluent5.4	#4
gukuang Guest Posts: n/a	Great thanks at first! You mean I can read the mesh by use of ICEM-CFD,and then export to the proper format which cfx-5.6 can use?

November 7, 2003, 20:05	Re: How import the mesh generated in fluent5.4	#5
gukuang Guest Posts: n/a	Thanks! It is a great pity that I havenot such knowledge of the Fluient grid format!Do you have such expierence which you are willing to share with our guys?

November 10, 2003, 18:17	Re: How import the mesh generated in fluent5.4	#6
Neale Guest Posts: n/a	I don't know what the Fluent format is. Perhaps you could ask your Fluent service rep? I was given the impression one time that the Fluent documentation describes the format. Neale

November 10, 2003, 23:38	Re: How import the mesh generated in fluent5.4	#7
derrek Guest Posts: n/a	yes, that is right!

November 13, 2003, 03:35	Re: How import the mesh generated in fluent5.4	#8
gukuang Guest Posts: n/a	Thanks a lot! I will try now!

November 13, 2003, 19:54	Re: How import the mesh generated in fluent5.4	#9
Martin Bowers Guest Posts: n/a	Try using a patran neutral file export from Fluent (.neu), and then import it into CFX-Pre. That has worked for me.

November 18, 2003, 09:17	Re: How import the mesh generated in fluent5.4	#10
gukuang Guest Posts: n/a	Yes,it really worked.Thank you very much! I have successly made it!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 06:09
Gambit problems	Althea	FLUENT	22	January 4, 2017 03:19
Mesh motion with Translation & Rotation	Doginal	CFX	2	January 12, 2014 06:21
CFX mesh import from ICEM (Windows)	Andrew	CFX	7	July 6, 2006 11:39
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38