CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Flotran -distributed resitance

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 14, 2004, 06:33
Default Flotran -distributed resitance
  #1
Zoltan Lakatos
Guest
 
Posts: n/a
Hi,

I'm doing a Flotran analysis and I have to model a cooler (for electric machines) with an air filter.The distributed resistance must be specified for the filter and I have the measured (pressure drop) vs (outlet velocity) diagram for the filter.How can I find from that the a and b coefficients for the friction factor f=a*(RE)**(-b)!? (From Darcy-Weisbach equation is possible to find the friction coefficient,but what is the hydraulic diameter and Reynolds-nr. in case of filters?) Has somebody experience using this method of specifying the distributed resistance?

Regards, Zoltan

  Reply With Quote

Old   April 14, 2004, 08:57
Default Re: Flotran -distributed resitance
  #2
didi
Guest
 
Posts: n/a
Trying is the best way. Change the parameter as long as the required pressure loss over the filter element is achieved.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
HP MPI warning...Distributed parallel processing Peter CFX 10 May 14, 2011 06:17
Ansys FLOTRAN. Remeshing according velocity vectors or streamlines? pablo--- ANSYS 2 December 11, 2009 05:35
Firewall settings bproc distributed file syntax mike_jaworski OpenFOAM 2 January 14, 2008 11:46
distributed mpich problem Trevor CFX 15 January 9, 2007 18:08
Flotran Arvind Main CFD Forum 0 May 15, 2002 18:10


All times are GMT -4. The time now is 12:57.