CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Mixture/multipahse/particletracking

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 3, 2005, 21:16
Default Mixture/multipahse/particletracking
  #1
sanziana
Guest
 
Posts: n/a
Hello CFX users,

I need your help in the following case:

I am trying to simulate the fire / water spray interaction. I have simulated the fire alone and the evaporation alone and works fine but i dont know how to couple this two.

In the literature it is ofen said that the fire is left for a few seconds to burn and after this the water particle tracking is activated. I don't know how to do this...

Anyway I tried to couple those two phases from the beginig creating a Domain with the fluid list made of methane air mixture and after this a tickled the particle tracking for water droplets. In this case the results show no combustion although I activated the combustion model. I have tryed many others combinations for the fluid list (the fluid in the domain) but no result...

Do you know how do i must set the Fluid Model (as a composition of what: i.e air, methane...water)? Any other sugestions are welcomed, Sanziana
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 18:27.