CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Redhat Linux/CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 31, 2005, 19:17
Default Redhat Linux/CFX
  #1
Meri
Guest
 
Posts: n/a
I recently loaded cfx5.7 on a machine with redhat 9.0, I was suprised that it did not run. I checked the cfx website and it shows it should run under Redhat 9.0 Here is the error message I got, perhaps there is a way to fix it

CFX-5.7 (C) 1996-2004 CFX Ltd. All rights reserved./home/cfd5/cfx57/CFX-5.7/bin/linux/Launcher.exe: relocation error: /home/cfd5/cfx57/Shared/qt-3.2.3-1/lib/Linux/libqt-mt.so.3: symbol _res, version GLIBC_2.0 not defined in file libc.so.6 with link time reference An error has occurred in cfx5:

The CFX Launcher /home/cfd5/cfx57/CFX-5.7/bin/linux/Launcher.exe exited with return code 127.
  Reply With Quote

Old   June 1, 2005, 05:43
Default Re: Redhat Linux/CFX
  #2
James Date
Guest
 
Posts: n/a
Try this.

In the CFX-5.7.1 installation manual page 22 it says that to use CFX-5.7.1 on Linux RedHat 9.0 platforms you need to install an RPM which patches the system to GLIBC version 2.3.2-27.9.4 or later. This RPM is available at http://rpmfind.net/linux/RPM/redhat/...-27.9.7.i686.h tml. You can check which version you have installed using the command: rpm -q glibc

A workaround while you are checking this is to use CFX-Pre with mesa (software) graphics rather than hardware graphics. You can do this by running CFX-Pre from the command line using cfxpre -gr mesa

James
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Netgen segfaults tetmeshing on Redhat EL5 djvictoid Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 June 11, 2011 06:53
C++ manual for RedHat 9.0 Abhijit Tilak Main CFD Forum 12 September 16, 2004 03:44
CFX5.6 on Redhat 9 Jingo CFX 5 July 31, 2003 17:09
Setup on Redhat Linux 8.0 / OpenMotif Library Steve Lewis CD-adapco 3 April 3, 2003 10:20
Fluent on RedHat 8.0 Jonas Larsson FLUENT 4 November 8, 2002 23:30


All times are GMT -4. The time now is 14:44.