CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

VORFN part

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 21, 2005, 15:59
Default VORFN part
  #1
Jack
Guest
 
Posts: n/a
Hi,

I assigned a block to be a VORFN part by mistake. How can I change it back to a fluid part?

Thanks!

  Reply With Quote

Old   June 21, 2005, 17:20
Default Re: VORFN part
  #2
Myron
Guest
 
Posts: n/a
Simply right-click on the Part name where it should be. Select Add to Part. The third icon choice will be for Blocking/Materials. Select the block to add to the Part. (Make sure VORFN is visible so you can select the block. Use the Index Control to limit displayed blocks to make the selection easier.)
  Reply With Quote

Old   June 22, 2005, 00:30
Default Re: VORFN part
  #3
Jack
Guest
 
Posts: n/a
Thanks a lot, Myron.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to simulate the rotation of a solid part Jiuan FLUENT 2 July 10, 2010 02:54
icem hexa - load different blockings for each part of geometry??? Catthan ANSYS Meshing & Geometry 2 May 28, 2010 11:27
[ICEM] How to mesh part by part? rikio ANSYS Meshing & Geometry 6 February 24, 2010 20:19
How to output data from stationary part only? Aerolex FLUENT 0 November 16, 2009 23:46
Any other way of converting a multi part to a single part avoiding ANSYS Design Model LusoMundo ANSYS Meshing & Geometry 1 May 14, 2009 14:35


All times are GMT -4. The time now is 09:43.