CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

which model in CFX5or10 can handel turb/laminar?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 24, 2006, 13:28
Default which model in CFX5or10 can handel turb/laminar?
  #1
steven
Guest
 
Posts: n/a
hi,

I heared from a person the other day that a model (I forget the model name) in CFX5or10 can automatically handel the switch between turbulent and laminar model in the same computational domain very well. Say in the same computational doman, some flow region is laminar, some is fully turbulent. So which model is better in CFX to handel such situation? K-omega?

thank you.
  Reply With Quote

Old   February 24, 2006, 14:53
Default Re: which model in CFX5or10 can handel turb/lamina
  #2
Robin
Guest
 
Posts: n/a
Hi Steven,

There is a transition turbulence model extension available with the SST model (which is, incidentally, a k-omega varient). You should review the documentation to ensure you use it correctly and that it does what you need it to do.

Regards, Robin
  Reply With Quote

Old   March 1, 2006, 12:10
Default Re: which model in CFX5or10 can handel turb/lamina
  #3
airtaohui
Guest
 
Posts: n/a
The SST(shear stress transport) Model can be applied in this situation. It is a mixer of k-omege model and k-epsilon model.Use k-omege model in the turbulent domain and use k-epsilon model in laminar domain.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reynolds Stress model in CFX vs Fluent Tim CFX 1 October 7, 2009 06:19
help for different between les model (subgrid-scale model) liuyuxuan FLUENT 1 October 2, 2009 15:25
Grid resolution for full-scale and down scaled model gravis Main CFD Forum 0 October 2, 2009 10:27
2 stage axial turbine model convergence issues sherifkadry CFX 2 September 7, 2009 20:51
LES and combustion model Margherita Cadorin CFX 0 October 29, 2008 06:24


All times are GMT -4. The time now is 23:01.