Home > Forums > CFX

airfoil analysis using cfx

Mark Forums Read

Reply

March 22, 2007, 04:34	airfoil analysis using cfx	#1
mopen Guest Posts: n/a	hi! iam newbie to cfd and i want to analyze an airfoil using cfx to get the lift and drag coefficients at post stall angle of attack can you please guide me how to do these from the beginning(i means from the geometry creation process) any help would be appreciated. thanks

March 22, 2007, 07:16	Re: airfoil analysis using cfx	#2
Joe Guest Posts: n/a	http://www.cfd-online.com/Wiki/Ansys...ible_answer.3F

Reply

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flow Analysis tilting Pad thrust bearing using CFX	julien	CFX	3	January 21, 2012 04:48
Steady level flight airfoil analysis using ANSYS CFX v12	flutter	CFX	18	December 13, 2011 23:18
Aerodynamic noise analysis with CFX	famarcfd	ANSYS	0	December 13, 2010 06:27
How to set boundaries about airfoil in CFX	adam_annie	CFX	2	January 24, 2010 19:20
CFX vs. Fluent for coupling analysis	aspirany	CFX	3	January 20, 2010 23:25

All times are GMT -4. The time now is 22:05.