|October 11, 2007, 09:56||
Developing Hydrodynamic Layer
I am performing a transient CFD with parabolic velocity for the steady part of inlet velocity and rectangular profile sinusoidal for fluctating part of the velocity at the inlet.
I see at some distance later the change in the x direction is zero.(Fine) But what I need is exactly the change in x-direction =0 as close as to the inlet(say 4-5 cells later) I forgot to say, this is also a heat transfer problem with a partion of the channel is heated at the upstream close to the inlet.
Is there a way to make x-direction changes (streamwise direction I mean by x) 0 starting from the inlet in an unsteady run?
Thanks in advance, Selim
|Thread||Thread Starter||Forum||Replies||Last Post|
|SnappyHexMesh - no layer added||bejbro||OpenFOAM Mesh Utilities||4||October 16, 2014 19:24|
|Boundary layer in a pipe||Clementhuon||OpenFOAM Native Meshers: snappyHexMesh and Others||6||March 12, 2012 13:41|
|Boundary layer generation problems||ivan_cozza||OpenFOAM Native Meshers: snappyHexMesh and Others||0||October 6, 2010 13:47|
|Spatially Developing Turbulent Boundary Layer Inlet||deji||OpenFOAM||1||June 8, 2010 14:52|
|errors||Fahad||Main CFD Forum||0||March 23, 2004 14:20|