|
[Sponsors] |
December 20, 2012, 16:15 |
cfx nanofluid
|
#1 |
Member
bitak
Join Date: Jul 2009
Posts: 56
Rep Power: 16 |
Hello.
How I can simulate nano fluid ( fluid + nano particle) in CFX? I should use particle transport model or dispersed solid model? if I use lagrangian model, I should solve my case unsteady? thanks... |
|
December 21, 2012, 10:35 |
|
#2 |
Senior Member
Chris DeGroot
Join Date: Nov 2011
Location: Canada
Posts: 414
Rep Power: 17 |
How many particles do you want to model? I am guessing if they are nano particles, it is a lot? Lagrangian gets more expensive with large numbers of particles. In the Modelling Guide there are tables with the advantages and disadvantages of each. You should weigh these factors when deciding which model to use.
In terms of running steady or unsteady, that depends on if your problem is steady or unsteady, although sometimes time-stepping to a steady-state solution can improve convergence for tough multiphase problems. |
|
December 21, 2012, 12:08 |
|
#3 |
Member
bitak
Join Date: Jul 2009
Posts: 56
Rep Power: 16 |
number of particles are 100.
|
|
December 21, 2012, 12:09 |
|
#4 |
Senior Member
Chris DeGroot
Join Date: Nov 2011
Location: Canada
Posts: 414
Rep Power: 17 |
I would use Lagrangian then.
|
|
December 22, 2012, 07:18 |
|
#5 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
Whoa there, not so fast.
We should put a FAQ up for nanoparticles, it has been asked quite a bit recently.... What physics is acting on the nanoparticles? The whole thing about nanoparticles is they do not have viscous drag acting on them, instead they have Brownian motion and possibly other forces which are usually ignored for multiphase simulations. So Lagrangian particle tracking is in general NOT suitable for nanoparticles as Lagrangian particle assume viscous drag. So unless you want to define your own particle force routine to put the correct forces on the particles, the approach I generally recommend is to use a passive scalar with diffusivity. The diffusivity can be used as a simple analog for Brownian motion. Bitak: What is the important physics acting on the particles? That will help decide what approach is best. |
|
December 22, 2012, 08:38 |
|
#6 |
Senior Member
Chris DeGroot
Join Date: Nov 2011
Location: Canada
Posts: 414
Rep Power: 17 |
Very interesting Glenn. I was not aware of the special physics behind nano particles.
|
|
December 23, 2012, 04:37 |
|
#7 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
It all comes from CFX being a Navier Stokes solver and that assumes a continuum. Somewhere in the range from micro to nano scale flows (1e-6 to 1e-9 metres) the continuum assumption becomes inaccurate and atomic level stuff starts becoming important. Ideally you should use a molecular kinetics solver for nano scale stuff, but depending on exactly what you are doing you might be able to get away with a NS solver like CFX.
That is why I asked for futher details - whether CFX can do it depends on what is to be modelled. |
|
December 23, 2012, 13:55 |
|
#8 |
Member
bitak
Join Date: Jul 2009
Posts: 56
Rep Power: 16 |
Thanks all.
I want to simulate ferrofluid ( nanoparticles have 10^-9 m diameter) in the tube (5 mm dimeter) and apply a magnetic fieild on this flow. my governing equations are navier stokes. I have no slip flow in my domain. I don't know I should simulate traansient or steady my problem? and which model in multiphase flow is useful for my problem and also is accurate? particle transport? or solid disperssion? Thanks... |
|
December 23, 2012, 15:02 |
|
#9 |
Senior Member
Chris DeGroot
Join Date: Nov 2011
Location: Canada
Posts: 414
Rep Power: 17 |
I think Glenn has already answered most of these questions for you. In terms of steady or unsteady that depends what you are trying to model. Are you seeking a steady state solution or are you interested in observing something that changes with time?
|
|
December 23, 2012, 16:26 |
|
#10 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
CFX can model the water bit easily. But dealing with the nanoparticles is a bit trickier. If you use a lagrangian particle tracking approach you are going to have to do something so Brownian motion can be modelled - although if you only have 100 particles the "random walk" approach sounds more appropriate. Tuning this so that it matches the true diffusion due to Brownian motion will be tricky. Adding a body force to the particles for the magentic field is relatively easy.
Alternately if you take the additional variable approach the diffusion is easy, but adding the magnetic body force to it will require some thought. Can I ask why do you care about 100 particles of diameter 1e-9m in a tube of water? There are going to be far more particles bigger than that just from contamination and shed off the tube wall and other sources. What makes the iron particles so important? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFX Treatment of Laminar and Turbulent Flows | Jade M | CFX | 18 | September 15, 2022 07:08 |
High Resolution (CFX) vs 2nd Order Upwind (Fluent) | gravis | ANSYS | 3 | March 24, 2011 02:43 |
CFX pressure in Simulations problem | nasdak | CFX | 1 | April 14, 2010 13:22 |
PhD using CFX | Rui | CFX | 9 | May 28, 2007 05:59 |
FSI using CFX and ANSYS | Bi Chang | CFX | 2 | May 10, 2005 04:47 |