CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

fractional intensity and turbulent intensity in CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 11, 2011, 07:00
Default fractional intensity and turbulent intensity in CFX
  #1
Senior Member
 
Nick
Join Date: Nov 2010
Posts: 120
Rep Power: 6
Nick R is on a distinguished road
Hi,

Just a quick question, when specifying turbulence intensity at the inlet in CFX there's a term called "fractional intensity". Say the Tu is 0.8% at inlet should this parameter be set to 0.008 or just 0.8?

Regards,
Nick
Nick R is offline   Reply With Quote

Old   April 6, 2013, 11:23
Default
  #2
Senior Member
 
hmasenger's Avatar
 
hamed
Join Date: Apr 2009
Posts: 148
Rep Power: 8
hmasenger is on a distinguished road
you should enter 0.008 which multiplyes by 100 equals to 0.8%
hmasenger is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solution Method & turbulent intensity in CFX 5.5.1 hamza albazzaz CFX 7 June 29, 2011 12:39
k-epsilon: Defining turbulent intensity and length scale? klausb OpenFOAM 0 January 23, 2011 08:28
Turbulent intensity swe704 Main CFD Forum 0 November 13, 2009 04:42
setting value of turbulent intensity and turbulent viscosity ratio in wind tunnel nuimlabib Main CFD Forum 0 August 4, 2009 00:05


All times are GMT -4. The time now is 20:27.