|
[Sponsors] |
September 13, 2011, 18:25 |
CFX runtime error
|
#1 |
New Member
Join Date: Oct 2010
Location: USA
Posts: 18
Rep Power: 15 |
I installed CFX just fine, but once the launcher is loaded and I try to run "CFX-Pre 11.0" a encounter a runtime error because of "CFX\bin\winnt\PreGui_ogl.exe". If I find the pregui_ogl.exe and try to run it from it's original location then I get an error that the "libCUEViewer.dll" cannot be found. The "libCUEViewer.dll" was installed in different folder within CFX. Why can't pregui_ogl.exe find libCUEViewer.dll?
This same problem occurs when running CFX-Post 11.0 even though the Solver opens fine. Does anyone know why this is happening? I tried reinstalling CFX, but that didn't work. I installed ICEM about 2 years ago, but just recently tried to install CFX. Thanks, Tony |
|
September 14, 2011, 02:26 |
|
#2 |
Senior Member
Lance
Join Date: Mar 2009
Posts: 669
Rep Power: 22 |
I dont know anything about your problem, but you do realize that the current version of CFX is 13 (and soon 14)? Why bother with installing old versions? Things like your problem might have been fixed in the current release.
|
|
September 14, 2011, 07:06 |
|
#3 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
Firstly I agree with Lance, I would not waste your time with old versions.
But I suspect your problem is with the display driver. Firstly check that you have the correct and up to date drivers for your video card. If that does not fix it then start CFX-Pre using the -mesa option to use CPU rendering and it should work, but you won't get as good video performance. |
|
September 14, 2011, 22:10 |
|
#4 |
New Member
Join Date: Oct 2010
Location: USA
Posts: 18
Rep Power: 15 |
Lance - I've had this version on my HD for years so I figured that I would just use it. I'll probably just upgrade to the new release though.
Glen - (Sorry I didn't see your response to this same issue that someone else had in the past) while trying to run the mesa option I got an error that says the viewer_mesa.exe does not exist :/ PS, I think my first problem is the integrated graphics card that I'm using on my old laptop. That might have to change. |
|
September 14, 2011, 23:31 |
|
#5 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
The CFX requirements state that you need to support openGL graphics (form memory). Integrated graphics, especially in old laptops, often does not support openGL - so time to upgrade the laptop.
But you might be able to run the mesa version. Are you sure you are doing the correct command line: "cfx5pre -graphics mesa" is what you are looking for I think. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
polynomial thermophysical properties II | sebastian | OpenFOAM Running, Solving & CFD | 54 | November 21, 2019 07:12 |
OpenFOAM install on Ubuntu Natty 11.04 | bkubicek | OpenFOAM | 13 | May 26, 2011 05:48 |
ParaView for OF-1.6-ext | Chrisi1984 | OpenFOAM Installation | 0 | December 31, 2010 06:42 |
CGNS lib and Fortran compiler | manaliac | Main CFD Forum | 2 | November 29, 2010 06:25 |
attach/detach (valve opening/closing) | phsieh2005 | OpenFOAM Running, Solving & CFD | 2 | March 21, 2009 05:18 |