|
[Sponsors] |
May 8, 2014, 10:09 |
Maxwell electromagnetics amps-turn question
|
#1 |
New Member
Join Date: May 2014
Posts: 2
Rep Power: 0 |
Hi guys,
Quick question on setting the excitation current on an ansys Maxwell electromagnetics analysis: I have a coil which has 1500 turns with 15 amps flowing through it. Do I set the excitation current as 22500 amps in the current excitation or will I create a single coil terminal with 1500 conductors and specify the inital current as 15A when specifying a winding to the coil terminal. Aplogies if im missing something obvious here, first time using Maxwell. Thanks in advance, Paul |
|
Tags |
ansys maxwell amps turns |
|
|