Difference between different multiphase models in Fluent??

Anandanarayanan · September 9, 2013, 14:05

Hi friendz...I'm little bit confused with the different multiphase models in Fluent...I would also like to know, to which multiphase application i can use the specific model...additional information's are appreciable.

oj.bulmer · October 2, 2013, 06:41

If you post a question this broad, I would be surprised if you got any elaborate answers. Have you referred the FLUENT documentation? There is plenty of information in there. Additionally, you can also download the presentation slides on this from ANSYS portal.

OJ

mostafa_zeynalabedini · February 9, 2014, 00:12

hello all
I have two question about Eulerian-Eulerian multiphase model in FLUENT. 1-Is this model the same as Two-fluid model by Ishii? If yes why it does not have any void fraction advection equation?
It has two set of conservation equation for each phase but a new unknown variable as void fraction (assume that we have two phase and their summation is equal to one, so there is one unknown void fraction). So two solve this set of equation another equation is required, and there is no other equation in FLUENT help document. So how does the Eulerian model work?
2-I searched in two-phase two-fluid model literature and there is mostly no solution of two-phase two-fluid model in 2dimension for stratified or slug flow. Because the interface position as one boundary (moving boundary) is not clear meanwhile the solution. So how does Eulerian model solve problems in 2 or 3dimension?????

nvnkush · January 3, 2023, 08:27

https://www.afs.enea.it/project/nept...th/node293.htm

September 9, 2013, 14:05	Difference between different multiphase models in Fluent??	#1
Anandanarayanan New Member Anandanarayanan R Join Date: May 2013 Location: Coimbatore(TN), India Posts: 5 Rep Power: 12	Hi friendz...I'm little bit confused with the different multiphase models in Fluent...I would also like to know, to which multiphase application i can use the specific model...additional information's are appreciable.

February 9, 2014, 00:12	Eulerian	#3
mostafa_zeynalabedini New Member mostafa Join Date: Jun 2013 Posts: 22 Rep Power: 12	hello all I have two question about Eulerian-Eulerian multiphase model in FLUENT. 1-Is this model the same as Two-fluid model by Ishii? If yes why it does not have any void fraction advection equation? It has two set of conservation equation for each phase but a new unknown variable as void fraction (assume that we have two phase and their summation is equal to one, so there is one unknown void fraction). So two solve this set of equation another equation is required, and there is no other equation in FLUENT help document. So how does the Eulerian model work? 2-I searched in two-phase two-fluid model literature and there is mostly no solution of two-phase two-fluid model in 2dimension for stratified or slug flow. Because the interface position as one boundary (moving boundary) is not clear meanwhile the solution. So how does Eulerian model solve problems in 2 or 3dimension?????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using real gas models in Fluent	neville	FLUENT	1	June 5, 2012 05:54
Multiphase flow modeling: CFX or FLUENT?	Paul	Main CFD Forum	8	January 24, 2012 09:25
fluent multiphase modelling	thinktank	FLUENT	0	November 28, 2009 13:41
FDS vs Fluent, what's the difference on LES?	Jim	FLUENT	0	August 12, 2006 15:32
implement user's models in Fluent	Steve	FLUENT	1	January 14, 2003 17:22

October 2, 2013, 06:41		#2
oj.bulmer Senior Member OJ Join Date: Apr 2012 Location: United Kindom Posts: 473 Rep Power: 20	If you post a question this broad, I would be surprised if you got any elaborate answers. Have you referred the FLUENT documentation? There is plenty of information in there. Additionally, you can also download the presentation slides on this from ANSYS portal. OJ

January 3, 2023, 08:27		#4
nvnkush New Member Naveen Join Date: Jan 2016 Location: INDIA Posts: 20 Rep Power: 10	https://www.afs.enea.it/project/nept...th/node293.htm